SOtM ACCESSORIES & CABLES

SOtM dCBL-U2 Cables

tX-USBexp PCIe to USB Host Audio Card

SOtM tX-USBexp PCIe to USB Host Audio Card • tX-USB PCIe Express USB 3.0 host card reduces electrical noise from inside the PC
• Noise filter circuit, ultra-low noise voltage regulator circuits, and ultra-low jitter oscillator circuit also reduces noises caused by the product itself
• Can be battery powered through external power input connector

Specifications:

PCI express USB interface chip set:
• USB 3.0 Compliant xHCI host controller
• Support SS(5Gbps),HS(480 Mbps),FS (12 Mbps),LS (1.5 Mbps)
• PCIe x1 Gen2 interface 
Internal power input:
• Input voltage : +12.0V(+0.5V, -0.5V)
• Input current : 2A
• 4pin IDE power connector 
External power input:
• Input voltage : +6.5V ~ +9Vdc
• Input current : 2A max
• 5.5mm OD, 2.1mm ID DC adaptor jack
USB port output power: 
• Output voltage : +5.0V(+0.5V, -0.25V)
• Over current protection : 1.5A at 20°C
• Recommend output current : 0.5A >
Operating environment:
• Operating temperature : 0°C ~ 30°C
• Storage temperature : -10°C ~ 50°C
• Operating & storage humidity : 10% ~ 90%
OS support:
• Windows 7 or higher version
• Linux


Back to Top



SATA filter II: Inline Power Noise Filter

SOtM SATA Filter • SATA noise filter blocks noise from HDD, ODD, and SSD, improving sound quality
• Ripple & RF noise filters are used
• Direct connect to SATA connector of storage device
• Flexible PCB

Specifications:

• Noise filtering voltage: +2V/+5V/+3V
• Current capacity: 2A max
• SATA 2.0 specification signal support


Back to Top



FAN Filter: Inline Power Noise Filter

SOtM FAN Filter • Noise filter that upgrades PC sound by blocking noise from CPU fan and system fan
• Ripple & RF noise filter used
• Directly connects to FAN connector of main board

Specifications:

• 4pin/3pin FAN support
• Current capacity: 2A max


Back to Top



dCBL-U2 Cables

SOtM dCBL-U2 Cables • dCBL-U2 USB cables designed to maximise the performance of USB audio devices
• Provides open, wide, dynamic sound
• Available in dCBL-U2-C UPOCC Copper or dCBL-U2-S UPOCC Silver
• Lengths: 1m, 1.5m, or 2m
• Choice of USB data-only, or USB data plus USB Power signal versions (Note: SOtM gear does not require USB power; SOtM recommends using USB data-only cable)

Specifications:

USB A-B connector:
• Support USB 2.0 Low-speed, Full-speed, High-speed
USB power signal rating:
• 5V DC
• 500mA max


Back to Top