ATC ACTIVE AMPLIFIER MODULES

ATC P6 Active Amplifier





P4 Active Amplifier

ATC P4 Active Amplifier • 4-way mono block design.
• ATC “Grounded Source Topology”.
• 850W Class AB total output.
• 4th order active crossovers with phase correction.
• Soft limiting driver protection.
• Triple fan cooling.
• 6 year warranty.
• Only available as part of an ATC active loudspeaker system.

Specifications:

Output Power: HF 100W into 6Ω, Mid 200W into 16Ω, LF 275W x 2 into 8Ω
Input Sensitivity: 2V
Input Impedance: 10kΩ
Frequency Response: 5Hz – 20 kHz ±0.1dB
Signal to Noise Ratio: Better than 105dB
Crosstalk: Better than 90dB
Power Requirements: 100, 115, 230 Volts (region dependant 50/60Hz factory set)
Dimensions: 19˝ Rack Mounting 5U high (222mm / 8.7˝), Overall Depth 538mm (21.2″), Front Panel and Handles 71mm (2.8˝), Rear Handles 40mm (1.6˝),
Amplifier Body 427mm (16.8˝ )
Weight: 40kg approx.


Back to Top



P4-S Active Amplifier

ATC P4 Active Amplifier • 4-way mono-block design.
• ATC “Grounded Source Topology”.
• 1300W Class AB total output.
• 4th order active crossovers with phase correction.
• Soft limiting driver protection.
• Triple fan cooling.
• 6 year warranty.
• Only available as part of an ATC active loudspeaker system.

Specifications:

Output Power: HF 200W into 6Ω, Mid 300W into 16Ω, LF 400W x 2 into 8Ω
Input Sensitivity: 2V
Input Impedance: 10kΩ
Frequency Response: 5Hz – 20 kHz ±0.1dB
Signal to Noise Ratio: Better than 105dB
Crosstalk: Better than 90dB
Power Requirements: 100, 115, 230 Volts (region dependant 50/60Hz factory set)
Dimensions: 19˝ Rack Mounting 5U high (222mm / 8.7˝), Overall Depth 538mm (21.2″), Front Panel and Handles 71mm (2.8˝), Rear Handles 40mm (1.6˝), Amplifier Body 427mm (16.8˝ )
Weight: 40kg approx.


Back to Top



P6 Active Amplifier

ATC P6 Active AmplifierDedicated amplifier for the EL150 but can be used with all ATC 3-way products with an ATC adaptor kit.
• Dual-Mono 3-way design (total 6 channels).
• 2 x 350W total output power (2x (200W LF, 100W MF, 50W HF)).
• Ultra low noise discrete design throughout.
• 3-way active crossovers with phase equalisation.
• Billet and extruded aluminium chassis construction.
• 6 year warranty.

Specifications:

Output Power/Stereo Ch. (RMS):
HF: 50 Watts into 6 ohms
MF: 100 Watts into 16 ohms
LF: 200 Watts into 8 ohms
Input Sensitivity: 1V RMS
Input Impedance: 5k ohms
Frequency Response: 5Hz – 200KHz ±0.1dB (ignoring mid amp filters)
Signal / Noise Ratio: Better than 105dB
TDH: Better than 90dB/0.0032%
Power Requirements: Voltage: 110, 115, 230
Frequency: 50/60Hz (region dependent, factory set)
Dimensions (HxWxD): 427x634x318mm
Weight: 50.5kg


Back to Top